Factory Direct Pneumatic Actuator Control Globe Valve

Pneumatic control globe valve also known as pneumatic cut-off valve, is a kind of actuator in the automation system, consisting of multi-spring pneumatic film actuator or floating piston actuator and regulating valve, receiving the signal of regulating instrument, controlling the cutting off, connecting or switching of the fluid in the process pipeline. It has the characteristics of simple structure, sensitive response and reliable action. It can be widely used in petroleum, chemical industry, metallurgy and other industrial production sectors. The air source of the pneumatic cut-off valve requires filtered compressed air, and the medium flowing through the valve body should be free of impurities and particles of liquid and gas. The cylinder of the pneumatic globe valve is a stereotyped product, which can be divided into single action and double action according to the mode of action. The single-acting product has a reset cylinder spring, which has the automatic reset function of losing air, that is, when the cylinder piston (or diaphragm) is under the action of the spring, the cylinder push rod is driven back to the initial position of the cylinder (the original position of the stroke). The double-acting cylinder has no return spring, and the advance and retreat of the push rod must depend on the inlet and outlet position of the cylinder air source. When the air source enters the upper chamber of the piston, the push rod moves downward. When the air source enters through the lower cavity of the piston, the push rod moves upward. Because there is no reset spring, the double-acting cylinder has more thrust than the same-diameter single-acting cylinder, but it does not have the automatic reset function. Obviously, different intake positions make the putter move in different directions. When the air intake position is in the back cavity of the push rod, the air intake makes the push rod advance, this way is called the positive cylinder. On the contrary, when the air intake position is on the same side of the push rod, the air intake makes the push rod back, which is called the reaction cylinder. Pneumatic globe valve because the general need to lose air protection function, usually use a single acting cylinder.

As a professional Pneumatic Actuator Control Gate Valve and exporter, we promise to provide customers with high-quality after-sales service, including the following: 1.Provide product usage guidance and maintenance suggestions. 2.For failures caused by product quality problems, we promise to provide technical support and troubleshooting within the shortest possible time. 3.Except for damage caused by normal use, we provide free repair and replacement services. 4.We promise to respond quickly to customer service needs during the product warranty period. 5. We provide long-term technical support, online consulting and training services. Our goal is to provide customers with the best service experience and make customers' experience more pleasant and easy.

1. the valve body structure has a single seat, sleeve, double seat (two three-way) three kinds, sealing forms have packing seal and bellows seal two kinds, the product nominal pressure grade PN10, 16, 40, 64 four kinds, nominal caliber range DN20 ~ 200mm. Applicable fluid temperature from -60 to 450℃. The leakage level is class IV or Class VI. The flow characteristic is fast opening; 2. the multi-spring actuator and the adjusting mechanism are connected with three columns, the entire height can be reduced by about 30%, and the weight can be reduced by about 30%; 3. the valve body is designed according to the principle of fluid mechanics into a low flow resistance flow channel, rated flow coefficient increased by 30%; 4. the sealing part of the valve inner parts have two kinds of tight and soft seal, tight type for surfacing cemented carbide, soft seal type for soft material, good sealing performance when closed; 5. balanced valve internals, improve the allowable pressure difference of the cut-off valve; 6. The bellows seal form a complete seal on the moving valve stem, blocking the possibility of leakage of the medium; 7, piston actuator, large operating force, use of large pressure difference.

Product	Pneumatic Actuator Control Globe Valve
Nominal diameter	NPS 1/2”. 1”, 1 1/4”, 1 1/2”, 2”, 3”, 4”, 6”, 8” , 10” , 12” , 14”, 16”, 18”, 20” 24”, 28”, 32”, 36”, 40”, 48”
Nominal diameter	Class 150LB, 300LB, 600LB, 900LB, 1500LB, 2500LB.
End Connection	Flanged (RF, RTJ, FF), Welded.
Operation	Pneumatic Actuator
Materials	A216 WCB, WC6, WC9, A352 LCB, A351 CF8, CF8M, CF3, CF3M, A995 4A, A995 5A, A995 6A, Alloy 20, Monel, Inconel, Hastelloy, Aluminum Bronze and other special alloy. A105, LF2, F5, F11, F22, A182 F304 (L), F316 (L), F347, F321, F51, Alloy 20, Monel, Inconel, Hastelloy
Structure	Outside Screw & Yoke (OS&Y), Rising stem, Bolted Bonnet or Pressure Seal Bonnet
Design and Manufacturer	BS 1873, API 623
Face to Face	ASME B16.10
End Connection	ASME B16.5 (RF & RTJ)
	ASME B16.25 (BW)
Test and Inspection	API 598
Other	NACE MR-0175, NACE MR-0103, ISO 15848, API624
Also available per	PT, UT, RT,MT.

During the opening and closing process of the forged steel globe valve, because the friction between the disc and the sealing surface of the valve body is smaller than that of the gate valve, it is wear-resistant. The opening or closing stroke of the valve stem is relatively short, and it has a very reliable cut-off function, and because the change of the valve seat port is proportional to the stroke of the valve disc, it is very suitable for the adjustment of the flow rate. Therefore, this type of valve is very suitable for cut-off or regulation and throttling.

Pneumatic Actuator Control Globe Valve

Products Details

Featured Products

Contact us