Y Strainer is an indispensable filter device in the pipeline system of conveying media. Y-type filter is usually installed at the inlet end of pressure reducing valve, pressure relief valve, fixed level valve or other equipment to remove impurities in the media to protect the normal use of valves and equipment. Y-type filter has the characteristics of advanced structure, low resistance, convenient blowdown and so on. Y-type filter applicable media can be water, oil, gas. Generally, the water network is 18 to 30 mesh, the ventilation network is 10 to 100 mesh, and the oil network is 100 to 480 mesh. The basket filter is mainly composed of nozzle, main pipe, filter blue, flange, flange cover and fastener. When the liquid enters the filter blue through the main pipe, the solid impurity particles are blocked in the filter blue, and the clean fluid is discharged through the filter blue and the filter outlet. Y-type filter is Y-shaped, one end is to make water and other liquid through, one end is to precipitate waste, impurities, usually it is installed in the pressure reducing valve, pressure relief valve, fixed level valve or other equipment inlet end, its role is to remove impurities in the water, to protect the valve and equipment normal operation of the role of the filter to be treated by the water inlet into the body, Impurities in the water are deposited on the stainless steel filter, resulting in a pressure difference. Monitor the pressure difference change of inlet and outlet through the pressure difference switch. When the pressure difference reaches the set value, the electric controller gives the hydraulic control valve and the drive motor signal to trigger the following actions: The motor drives the brush to rotate, cleaning the filter element, while the control valve is opened for sewage discharge, the whole cleaning process only lasts for tens of seconds, when the cleaning is finished, the control valve is closed, the motor stops rotating, the system returns to its initial state, and begins to enter the next filtration process. After the equipment is installed, the technical personnel will debug, set the filtration time and cleaning conversion time, and the water to be treated will enter the body by the water inlet, and the filter will start to work normally1. strong anti-pollution, convenient sewage; Large circulation area, small pressure loss; Simple structure, small size. Light weight. 2. filter mesh material. All made of stainless steel. Strong corrosion resistance. Long service life. 3. filter density: L0-120 mesh, medium: steam, air, water, oil, or customized according to user requirements. 4. telescopic characteristics: stretch length. Large position can be extended 100mm. Facilitate easy installation. Improve work efficiency.The after-sales service of the floating ball valve is very important, because only timely and effective after-sales service can ensure its long-term and stable operation. The following are the after-sales service contents of some floating ball valves: 1.Installation and commissioning: After-sales service personnel will go to the site to install and debug the floating ball valve to ensure its stable and normal operation. 2.Maintenance: Regularly maintain the floating ball valve to ensure that it is in the best working condition and reduce the failure rate. 3.Troubleshooting: If the floating ball valve fails, the after-sales service personnel will carry out on-site troubleshooting in the shortest possible time to ensure its normal operation. 4.Product update and upgrade: In response to new materials and new technologies emerging in the market, after-sales service personnel will promptly recommend update and upgrade solutions to customers to provide them with better valve products. 5. Knowledge training: After-sales service personnel will provide valve knowledge training to users to improve the management and maintenance level of users using floating ball valves. In short, the after-sales service of the floating ball valve should be guaranteed in all directions. Only in this way can it bring users a better experience and purchase safety.

Product	Y Strainer
Nominal diameter	NPS 2”, 3”, 4”, 6”, 8”, 10”, 12”, 14”, 16”, 18”, 20”, 24”, 28”, 32”, 36”, 40”, 48”
Nominal diameter	Class 150, 300, 600, 900, 1500, 2500.
End Connection	Flanged (RF, RTJ), BW, PE
Operation	None
Materials	Forged: A105, A182 F304, F3304L, F316, F316L, A182 F51, F53, A350 LF2, LF3, LF5
	Casting: A216 WCB, A351 CF3, CF8, CF3M, CF8M, A352 LCB, LCC, LC2, A995 4A. 5A, Inconel, Hastelloy, Monel
Structure	Full or Reduced Bore,
	RF, RTJ, BW or PE,
	Side entry, top entry, or welded body design
	Double Block & Bleed (DBB)，Double Isolation & Bleed (DIB)
	Emergency seat and stem injection
	Anti-Static Device
Design and Manufacturer	API 6D, API 608, ISO 17292
Face to Face	API 6D, ASME B16.10
End Connection	BW (ASME B16.25)
	MSS SP-44
	RF, RTJ (ASME B16.5, ASME B16.47)
Test and Inspection	API 6D, API 598
Other	NACE MR-0175, NACE MR-0103, ISO 15848
Also available per	PT, UT, RT,MT.
Fire safe design	API 6FA, API 607